Picture |
Heading |
Updated |
|
Pinch roll for papermaking machinery
Roll Body: Q235B reel pipe; thickness: 18mm; the thickness of the finished product wall is 14mm
Spindle head: using 45# carbon steel conditioning treatment after rough turning
Bulkhead is made of HT200 cast iron
To produce finished products ... |
2017-12-07 |
|
Felt Roll for papermaking machinery
Roll Body: Q235B reel pipe; thickness:18mm ; the thickness of the finished product wall is 14mm
Spindle head: using 45# carbon steel conditioning treatment after rough turning
Bulkhead is made of HT200 cast iron.
To produce finished products... |
2017-11-23 |
|
Couch Roll for papermaking machinery
Roll Body: Q235B reel pipe; thickness:25mm ; the thickness of the finished product wall is 20mm
Spindle head: using 45# carbon steel conditioning treatment after rough turning
Bulkhead is made of HT200 cast iron.
To produce finished products... |
2017-10-31 |
|
Spreading roll for papermaking machinery
Roll Body: Q235B reel pipe; thickness: 35mm; the thickness of the finished product wall is 25mm
Spindle head: using 42Cr conditioning treatment after rough turning
Bulkhead is made of HT200 cast iron
To produce finished products according to... |
2017-10-26 |
|
Venta-nip press roll for papermaking machinery
Roll Body: adopt HT250 cast iron to cast inside and outside, thickness: 100mm the thickness of the finished product wall is 80mm
Bulkhead is made of HT200 cast iron
Spindle head: using 45# carbon steel conditioning treatment after rough turning... |
2017-10-17 |
|
Press Roll for papermaking machinery
Roll Body: adopt HT-300 cast iron to cast inside and outside; thickness: 100mm the thickness of the finished product wall is 80mm
Cylinder Head: adopt ZG270-500 cast iron to cast and temper. shaft diameter lathe:1:12 use hydraulic pressure
To ... |
2017-10-13 |
|
Drying roll for papermaking machinery
Roll Body: Q235B reel pipe; thickness: 18mm; the thickness of the finished product wall is 14mm
Spindle head: using 45# carbon steel conditioning treatment after rough turning
Bulkhead is made of HT200 cast iron
To produce finished products ... |
2017-10-01 |
|
Wire drive Roll for papermaking machinery
Roll Body: Q235B reel pipe; thickness: 28mm ; the thickness of the finished product wall is 25mm
Bulkhead is made of HT200 cast iron.
Spindle head: using 45# carbon steel conditioning treatment after rough turning
Spindle heads with baffles ... |
2017-09-22 |